Skip to content

InertialSense

Configuration

InertialSense

Overview
Data Sheets
Dimensions and Pinouts
Getting Started
Getting Started
- Overview
- IMX-5
- GPX-1
Hardware Integration
Hardware Integration
- IMX-6
- IMX-5
- GPX-1
- Rugged-3
- IG-1
- IG-2
- IK-1
- Design Files
- Reflow Soldering
Software / SDK
Software / SDK
- EvalTool
- CLTool
- Log Inspector
- SDK Overview
- Example Projects
  Example Projects
IMX
IMX
- Configuration
  Configuration
- Dead Reckoning
  Dead Reckoning
  - Overview
  - Examples
- IMU Shock Rejection
GPX
GPX
- Configuration Configuration
  Table of contents
  - Disable VCC_RF
- GPX System Status
Communication Protocols
Communication Protocols
GNSS - RTK
GNSS - RTK
- Multi-band GNSS
  Multi-band GNSS
- External NMEA GNSS
- GNSS Antennas
- GNSS Constellations
- RTK Positioning
  RTK Positioning
  - Overview
  - Rover Setup
  - Base Setup
  - NTRIP
  - Point Perfect
  - SBAS
- RTK Compassing
Data Logging/Plotting
Data Logging/Plotting
Reference
Reference
User Manual PDF
FAQ
Troubleshooting
Troubleshooting

GPX Configuration¶

Disable VCC_RF¶

The VCC_RF output (GPX pin 16) used to power active GNSS antennas can be disabled by setting bit GPX_SYS_CFG_BITS_DISABLE_VCC_RF (0x00000001) in DID_GPX_FLASH_CFG.sysCfgBits.